16) Install the Rear Upper Cover.
MEMO:
Be sure to install the 3 TP screws show in the figure below.
17) Install the Side Cover.
•
1 Screw
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
F-9-400
Hook
Hook
F-9-401
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
18) Affix the LED Label.
19) Close the Right Rear Cover 1.
20) Return the Left Rear Cover to its original position, and secure the Reader Communication
Cable and the Reader Power Supply Cable in place using the Wire Saddles.
21) Connect the power plug to the outlet.
22) Turn ON the main power switch.
9-194
F-9-402
9-194