Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1053

3) Insert the Wireless LAN Board into the connector on the Expansion PCB, and install it to
the Expansion Support Plate.
•
1 Screw (TP; M3x6) (Included in the Wireless LAN Board)
4) Remove the Face Plate from the Main Controller PCB 1. (The removed Face Plate will not
be used.)
• 2 Screws (The removed screws will be used in step 7).)
x2
9
Installation > Installation Procedure for Expansion Bus-F1, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expan
5) Install the 3 PCB Spacers (included in the Expansion Bus Kit).
F-9-210 F-9-210
6) Install the Expansion Support Plate assembled in step 3) to the Main Controller PCB 1.
•
F-9-211 F-9-211
9
Installation > Installation Procedure for Expansion Bus-F1, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expan
3 Screws (TP; M3x6) (Included in the Expansion Bus Kit)
CAUTION:
When installing the Expansion Support Plate, be careful not to trap the Fan Cable.
x3
9-91
F-9-212 F-9-212
F-9-213 F-9-213
9-91