9) Open the Controller Box, and disconnect the Signal Cable and the Power Supply Cable on
the host machine. (Disconnected cables will not be used.)
•
2 Connectors
•
9 Wire Saddles
•
2 Edge Saddles
x2
x11
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
10) Remove the HDD Case Unit.
•
2 Screws (The removed screws will be used in "Installing the HDD Case Unit" step 1).)
F-9-248
F-9-248
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
x2
F-9-249
F-9-249
9-112
9-112