Paper Deck Heater Unit-A1; Checking Before Installation; Checking The Supplied Parts - Canon imagePRESS Lite C270 Installation Manual

Paper Deck Heater Unit-A1

Checking before Installation

Requirements for the installation place are given below. It is recommended to look over the place to be used for installation before
delivering the equipment to the user.
CAUTION:
• Install the host machine first and then install the Paper Deck Unit.
• Do not carry the Paper Deck Unit with the host machine is installed for prevention of breakage.

Checking the Supplied Parts

NOTE:
Each part of the Paper Deck Heater Unit-A1 for the Paper Deck is supplied as a service part according to the location, so prepare
the following parts.
Also, use the appropriate Paper Deck Heater Unit for each country.
Item
[1] Heater unit
[2] AC input connector
[3] Relay harness unit
[4] AC cable
[5] Screw (Toothed washer; M4x6)
*[6] Cable protection bushing
[7] Power supply label
[8] Screw (Binding; M4x4)
[9] Screw (RS Tightening; M4x8)
[10] Wire saddle
[11] Cord mount
[12] Screw with flat spring (M4x10)
*As for the change of the part number, please refer to the latest parts catalog.
[2]
[4]
[12]
[5]
[8]
[10]
[11]
Parts Name
[3]
[6]
[9]
[7]
[5]
Parts Number
FG6-9650 (100V)
FG6-9651 (230V)
FG6-1117
FG6-2957
FK3-0630 (100V)
FK3-0631 (230V)
XB2-7400-607
WT2-5098
FS6-8478 (100V)
FS6-8725 (230V)
XB1-2400-409
XA9-0732-010
WT2-5730
FC7-5473
XB2-8401-007
364
5. Paper Feed Options
[5]
[1]
Q'ty
1pc.
1pc.
1pc.
1pc.
3pcs.
1pc.
1pc.
2pcs.
2pcs.
3pcs.
1pc.
1pc.