Messages - Siemens SIMATIC PCS 7 Function Manual

7.3.3

Messages

Operator messages
The following messages can be output:
Message
class
Operator
message
The table below shows the message associated values:
Message associated value
Message associated value 1
Message associated value 2
Message associated value 3
Message associated value 4
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Event Offset
Apply button 0
Delete button 1
Activate job button 2
Button 3
Button 4
Button 5
Start button 6
Hold button 7
Resume button 8
End button 9
Abort button 10
Button 11
Button 12
Button 13
Button 14
Auto button 15
Manual button 16
Internal button 17
External button 18
One time button 19
Cyclic button 20
Button 21
Button 22
@1%s@
@2%@
@3%@
@4%d@
7.3 Operator control and monitoring
INT job create new ID@4%d@ parameter set @9%s@
setpoint @5%g@@8%s@
INT job delete ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
INT job activate ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
MANUAL start ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
MANUAL hold ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
MANUAL resume ID@4%d@ parameter set @9%s@
setpoint @5%g@@8%s@
MANUAL end ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
MANUAL abort ID@4%d@ parameter set @9%s@ set‐
point @5%g@@8%s@
Switchover to automatic mode
Switchover to manual mode
Switchover to internal mode
Switchover to external mode
Switchover to one time mode
Switchover to cyclic mode
Format
BA_NA
Not used
Not used
ID
Order management
Message text
Value
209