Messaging - Siemens SIMATIC PCS 7 Function Manual

5.2.6

Messaging

The "FB_SACT" block uses the "ALARM_8P" block to generate messages. Following CPU
startup, messages are suppressed (QMSG_SUP = 1) until the "RUNUPCYC" cycles have
elapsed.
The following messages can be output:
Message Message class
SIG_1 AS process control
Message - error
SIG_2 AS process control
Message - fault
SIG_3 AS process control
Message - fault
SIG_4 AS process control
Message - error
SIG_5 AS process control
Message - error
SIG_6 AS process control
Message - fault
SIG_7 AS process control
Message - error
SIG_8 No message
The following keywords are used:
● $$BlockComment$$: instance-specific block comment.
● $$HID$$ source
● $$AREA$$: OS_AREA
The following associated values are used:
SD_1
SD_2
SD_3
SD_4
SD_5
SD_6
SD_7
SD_8
SD_9
SD_10
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
IN_COUNT <= 0 or > 10
Communication error, error message
from "BSEND" coupling blocks
REQ_ID in request and receive struc‐
ture not the same
ID or TIME_MON <= 0 or ARCH_NA
not specified
No instance data block or insufficient
data length
Maximum data cell size exceeded,
data cell > 16230 bytes
IN_CNT... < 0 or > 15
-
Associated value
Event
$$BlockComment$$ QCNT_ERR parame‐
ter error IN_COUNT <=0 or >10 D
@4%d@, IN_COUNT @6%d@
$$BlockComment$$ QMONERR monitor‐
ing timeout D @4%d@, IN_COUNT
@6%d@
$$BlockComment$$ QERR data error ID
@4%d@, IN_COUNT @6%d@
$$BlockComment$$ QPARAMF parame‐
ter assignment error ID @4%d@
$$BlockComment$$ QINDBERR parame‐
ter error instance DB @5%d@ ID @4%d@
$$BlockComment$$ QLEN_ERR length er‐
ror writing data record ID @4%d@
$$BlockComment$$ QBOOLERR parame‐
ter error IN_CNT <0 or >15 ID @4%d@,
instance DB @5%d@, IN_COUNT
@6%d@
-
Format
-
-
-
@4%d@
@5%d@
@6%d@
-
-
-
-
Storage location management
5.2 FB_SACT
Message text
Value
ID
IN_DB number
IN_COUNT
83