Siemens SIMATIC PCS 7 Function Manual page 177

Function releases
The following outputs of the "FB_JOB" function block provide information on the function
enables (1 = Enabled, 0 = Not enabled).
"Start"
"Hold"
"Resume"
"End"
"Abort"
"Up"
"Down"
"Create job"
"Delete job"
"Activate job"
"Apply"
Enabled operations
You can use the enable bits of the "FB_JOB" block input word "OP_EN" to specify whether
buttons/functions in the "FB_JOB" faceplate are enabled (1 = Enable, 0 = No enable).
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Function
RELSTART
RELHOLD
RELRESUM
RELEND
RELABORT
RELPOSUP
RELPOSDO
RELNEW
RELDEL
RELACJO
RELTAOV
Output
● Job processing is not active
● Job available
● Job has been released (RUN_EN)
● "Abort" job is not active
● Job feedback has not been started
● Job feedback not running
● Job processing is active
● "Hold" job is not active
● Job processing is active
● "Resume" job is not active
● "Abort" job is not active
● Job has been released (RUN_EN)
● "JOB_ON"
● Job processing is active
● "End" job is not active
● "Abort" job is not active
● "JOB_ON"
● "Abort" job is not active
● Job available
Job position 2 or higher selected
Job position between first
and second-to-last possible position selected
● Job list not full
● "New" job is not active
● Data request via "FB_XXXPA" is not active
● No pending data request errors
Job position selected
No job in the job interface
and at least one job available in the job list
"New" job is active
Order management
7.1 FB_JOB
Conditions
177