Number Ranges Of Alarms And Messages - Siemens SINUMERIK 840D sl Commissioning Manual

Modifiable alarm text files
You can insert you own texts in the following files:
alpu.txt
alsi.txt
alc.txt
In the "cycles" subdirectory (/oem/sinumerik/cycles/lng/deu):
aluc.txt
alzu.txt
4.2

Number ranges of alarms and messages

Alarm numbers
The following alarm number ranges are available for cycle, compile cycle and PLC
alarms/messages:
Table 4-1 Alarm number ranges
Number range Name
000000 - 000320 Safety alarms
085000 - 089990 User-cycle and tool-
management texts, supplement
texts for user interface (Wizard)
065000 - 065999 Cycle alarm (user)
066000 - 066999
067000 – 067999
068000 - 069000 Reserved
070000 - 079999 Compile cycle alarms
400000 - 499999 PLC alarms general
500000 - 599999 PLC messages for axis/spindle
and channels
700000 - 709999 PLC messages for users
800000 – 899999 PLC alarms for sequence
cascades/graphs
810000 - 810009 System messages in the PLC
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
PLC alarm/message texts
Safety Integrated alarm texts
Compile cycle alarm text
User-cycle and tool-management texts
Amend texts for user interface (wizard)
User cycle alarm texts
4.2 Number ranges of alarms and messages
Effect
Display, interlocking NC start
Display, interlock NC start,
motion standstill after executing
the pre-decoded blocks
Display
Creating user-specific alarm texts
Deleting File name
alsi.txt
aluc.txt
Reset alzu.txt
Reset
Cancel
alc.txt
alpu.txt
75