Parameter management
6.1 FB_XXXPA
6.1.2
Generation
For each parameter group created using the engineering tool in the "FB_PARAMGROUP" user
archive, a block of the type "FB_XXXPA" is generated and saved in the master data library.
The generated blocks are numbered consecutively.
The block input and output parameters depend on the structure of the
"FB_PARAMATTRIB_XXX" user archive in which the properties of a parameter group are
defined. The corresponding block needs to be generated again if the attributes are changed.
The figure below gives an overview of the structure of "FB_XXXPA" blocks:
146
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA