Siemens SIMATIC PCS 7 Function Manual page 56

Material lot management
4.1 FB_MLOT
Message Message class
SIG_7 AS process control
Message - fault
SIG_8 AS process control
Message - fault
The following keywords are used:
● $$BlockComment$$: instance-specific block comment.
● $$HID$$ source
● $$AREA$$: OS_AREA
● @1%s@: Batch ID
The following associated values are used:
SD_1
SD_2
SD_3
SD_4
SD_5
SD_6
SD_7
SD_8
SD_9
SD_10
"ALARM_8P_2" block messages
The "FB_MLOT" block uses the "ALARM_8P_2" block to generate messages. Following CPU
startup, messages are suppressed (QMSG_SUP = 1) until the "RUNUPCYC" cycles have
elapsed.
The following messages can be output:
Message Message class
SIG_1 AS process control
Message - fault
SIG_2
SIG_3
SIG_4
SIG_5
SIG_6
SIG_7
SIG_8
56
More than one action (insert/update/de‐
lete) triggered in same cycle
Action not possible because an action is
already active (insert/update/delete)
Associated value
Error in the version information
None
None
None
None
None
None
None
Event
Format
@1%s@
@2%d@
@3%d@
@4%d@
@5%d@
@6%d@
@7%s@
@8%s@
-
-
Event
Message text
$$BlockComment$$ QREQ_ERR,
more than one trigger of function ac‐
tive ID @4%d@
$$BlockComment$$ QIN_PROC, a
write job is already active ID @4%d@
Value
BA_NA
STEP_NO
BA_ID
ID
READ REC_ID
WRITE REC ID
NAME part 1
NAME part 2
Message text
$$BlockComment$$ QERR_VER
Error in version check
$$BlockComment$$ A8P_2 SIG2
$$BlockComment$$ A8P_2 SIG3
$$BlockComment$$ A8P_2 SIG4
$$BlockComment$$ A8P_2 SIG5
$$BlockComment$$ A8P_2 SIG6
$$BlockComment$$ A8P_2 SIG7
$$BlockComment$$ A8P_2 SIG8
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA