Storage location management
5.7 Operator control and monitoring
5.7.2
Picture objects
The interface for storage location management operator control and monitoring consists of the
following picture objects:
WinCC flow charts
● FB_STOR_ED.pdl
The picture allows you to create, change, delete and copy storage location master data
and to carry out updates with AS data.
● @FB_STOR_ED_WINDOW.pdl
You can use the picture to edit the attribute and actual value parameters of the storage
locations. This picture is implemented as a window in the "FB_STOR_ED" picture and
cannot be used separately.
● FB_STOR.pdl
The picture gives a freely configurable overview of all storage locations.
Faceplates with FB assignment
● @PG_FB_STLOC.PDL
The faceplate enables you to search possible storage locations for material so that you can
store it.
● @PG_FB_STMAT.PDL
The faceplate enables you to search for material in storage locations so that you can export
it.
Faceplates without FB assignment
● @PG_FB_MAT_ADJ.pdl
This faceplate enables manual adjustment booking of material lots (including partial
quantities) to storage locations.
● @PG_FB_MAT_IN.pdl
This faceplate enables manual booking of materials and material lots (including partial
quantities) to storage locations.
● @PG_FB_MAT_OUT.pdl
This faceplate enables manual clearing of materials and material lots (including partial
quantities) from storage locations.
● @PG_FB_MAT_IO.pdl
This faceplate enables manual clearing and booking of materials and material lots (including
partial quantities) from one storage location to another. The procedure is implemented in
one step.
● @PG_FB_MAT_CONV.pdl
This faceplate enables the manual conversion of materials and material lots in a storage
location.
130
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA