Siemens SIMATIC PCS 7 Function Manual page 18

Communication
2.1 FB_UA_RM
Parameter
QPRI_MIN
QPRI_MAX
QPRI_ACT
QPRI_IND
QGEN_OS
GEN_AS
In/out parameters
The following table shows the in/out parameters of the "FB_UA_RM" block:
Parameter
REC_REQ
RESET
REQ_ERR
OS_TRIG
Archive designation (transferred from requesting block)
The archive designation comprises the archive name and the archive number in the following
format:
"ARCH_NA"_"ARCH_NO"
Example:
ARCH_NA = "FB_MATERIAL" and ARCH_NO = "1"
This produces the archive designation "FB_MATERIAL_001" (the archive number is always 3-
digit).
If the archive designation comprises only the archive name, a "0" is entered for the "ARCH_NO"
parameter.
Column specification (COLUMN and NO_COL) (transferred from requesting block)
If the value of the "COLUMN" is equal to "0", the entire row is read. In this case, the value of
the "NO_COL" parameter is irrelevant.
If the value of the "COLUMN" is greater than "0", data are read starting from the column
specified. In this case, the value of the "NO_COL" parameter must be greater than "0".
Auxiliary data cell (transferred from requesting block)
The application-specific auxiliary data cell is activated with the "DATA_EN" parameter.
When "DATA_EN" = "1", the bytes configured with the "DATA" pointer (a max. of 200) are
entered in the communication interface to the OS as 50 "DWORD". The communication
interface to the OS consists of the AS outputs "DATA_1" to "DATA_50".
18
Description
Lowest priority index allocated
Higher priority index allocated
Number of highest-priority request
Next priority index to be allocated
Target generation version
Generation version
Description
1 = OS read job active
1 = Reset read interface
OS script error ID
OS trigger
Type
INT
INT
INT
INT
DWORD
DWORD
Type
BOOL
BOOL
DINT
INT
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Default
0
0
0
0
DW#16#0
DW#16#0
Default
FALSE
FALSE
0
0