Siemens SIMATIC PCS 7 Function Manual page 205

SD_7
SD_8
SD_9
SD_10
ALARM_8P_6
ALARM_8P_6 is used to output "error messages" for job control:
Message Message class
SIG_1 AS process control
Message - fault
SIG_2
SIG_3
SIG_4
SIG_5
SIG_6
SIG_7
SIG_8
The following keywords are used:
● $$BlockComment$$: instance-specific block comment.
● $$HID$$ source
● $$AREA$$: OS_AREA
● @1%s@: Batch ID
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Associated value
Event
QERROR bit 16
"REQ_QERR"
QERROR bit 17
"REQ_MON_ERR"
QERROR bit 18
"REQ_QPARAMF"
QERROR bit 19
"REQ_QLEN_ERR"
QERROR bit 20
"REQ_QARCHERR"
QERROR bit 21
"REQ_TIMEMON"
QERROR bit 22
"COPY_QERR"
QERROR bit 23
"COPY_TIMEMON"
Format
-
-
-
-
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
error feedback "QERR" (ID@3%d@)
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
error feedback "MON_ERR" (ID@3%d@)
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
error feedback "QPARAMF" (ID@3%d@)
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
error feedback "QLEN_ERR" (ID@3%d@)
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
error feedback "QARCHERR" (ID@3%d@)
$$BlockComment$$ @4%6s@
Req. parameter @2%d@,
No feedback (ID@3%d@)
$$BlockComment$$ @4%6s@
Copy data record @2%d@ to job mailbox,
error "QERR" (ID@5%d@/ACTIVE ID@7%d@)
$$BlockComment$$ @4%6s@
Copy data record @2%d@ to job mailbox,
no feedback (ID@5%d@/ACTIVE ID@7%d@)
Order management
7.1 FB_JOB
Value
Message text
205