Siemens SIMATIC PCS 7 Function Manual page 229

STORAGE/MATERIAL/JOB STATE format
The APF Engineering Tool creates the following user archives, where various job, storage and
material states are saved:
● FB_JOB STATUS
● FB_STORAGE_STATUS
● FB_MATERIAL_STATUS
The archives are structured as follows:
REC_ID
NAME
TXTLIB
AENUMERATION format
An integer is saved in the archive, and a text up to 128 characters long for this integer can be
read from a corresponding archive.
In the APF Engineering Tool, you can specify a name in the "ENUM_MAT" column for an
archive which does not yet exist. This archive is then automatically generated and filled by the
APF Engineering Tool. This archive is structured as follows:
REC_ID
NAME
TXTLIB
Text formats
In contrast to other APF modules, the text instead of an ID is saved in the archive for all formats
which are to represent a text. A material, for example, is saved in the archive as text rather
than an ID as in parameter management.
The same applies for the following formats:
● 40 ENUMERATION -> STRING 16
● 50 MATERIAL -> STRING 64
● 52 MATERIALLOT -> STRING 64
● 71 STORAGE STATE -> STRING 32
● 72 MATERIAL STATE -> STRING 32
● 73 JOB STATE -> STRING 32
● 74 AENUMERATION -> STRING 128
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Element
Internal ID
Name
ID for multilingual management in the
text library
Element
Internal ID
Name
ID for multilingual management in the
text library
Description
Description
Archive management
8.3 User archives
Format
INTEGER 32
STRING 32
INTEGER 32
Format
IINTEGER 32
STRING 128
INTEGER 32
229