Messaging - Siemens SIMATIC PCS 7 Function Manual

Request struc‐
MON_ERR
5.5.6

Messaging

The "FB_STMAT" block uses the "ALARM_8P" block to generate messages. Following CPU
startup, messages are suppressed (QMSG_SUP = 1) until the "RUNUPCYC" cycles have
elapsed.
The following messages can be output:
Message Message class
SIG_1 AS process control
Message - fault
SIG_2 AS process control
Message - fault
SIG_3 AS process control
Message - fault
SIG_4 AS process control
Message - error
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Output
ture
QRERR
QMONERR
QRM_ERR
QRM_AERR
QRM_CERR
QRM_PERR
Length of the read data does not
match the length of the block outputs
Read job monitoring timeout
requested data and read data do not
match
Configuration error:
ID=0 or
ARCH_NA=' ' or
TIME_MON=0 or
with activated filter (EN_FILT=1) filter
ID < 0, or when use of remainder is
activated (EN_REM = 1) SPLIT_PT <
1 / >9 or LFILTER2 < 0 or
SEL_MODE = 0
Data error
Header data in request and receive structure not the same
Runtime error;
Monitoring timeout
Error from FB_UA_RM: Data error,
job data in WinCC communication interface do not correspond to
original job data
Error from FB_UA_RM: Archive error;
job data in the WinCC communication interface reset by the OS,
or script error occurred in OS
Error from FB_UA_RM: Communication error;
Error message from "BRCV" coupling blocks
Error from FB_UA_RM: Parameter assignment error;
incorrect ID_1, R_ID_1 or ID_2, R_ID_2 or duplicate REQ_ID
Event
$$BlockComment$$ QLEN_ERR data block
length of the receive data is not correct ID
@4%d@ REC_ID @5%d@ MAT @6%d@
quantity @8%d@ / @9%f@ @7%s@
$$BlockComment$$ QMONERR runtime er‐
ror read job ID @4%d@ REC_ID @5%d@
MAT @6%d@ quantity @8%d@ / @9%f@
@7%s@
$$BlockComment$$ QERR data error read
job ID @4%d@ REC_ID @5%d@ MAT
@6%d@ quantity @8%d@ / @9%f@
@7%s@
$$BlockComment$$ QPARAMF parameter
assignment error ID @4%d@
Storage location management
5.5 FB_STMAT
Meaning
Message text
119