Siemens SIMATIC PCS 7 Function Manual page 98

Storage location management
5.4 FB_STLOC
Parameter
LVALUE5B Interconnectable input:
Value 5 (date part 2)
LVALUE6 Interconnectable input: Value 6 (date part 1)
LVALUE6B Interconnectable input: Value 6 (date part 2)
OP_EN Enabled operations
HIDE_BUT Hide buttons
MODE Mode
MSG_EVID ALARM_8P: EV_ID
"MODE" parameter
You can define the mode of the block using the input word "MODE":
Bit
0 EDGE_START_NEC
1 QSEL_ERR_MSG
2 QRUN_ERR_MSG
"OP_EN" parameter
You can enable button operation in the faceplate with the input word "OP_EN". This enable is
only effective if the mode allows button operation.
Bit
0 AUT
1 MAN
2
3 POSITION
4 SEARCH
98
Description
Name
0 = Positive edge at the "L_START" input required.
1 = No positive edge at the "L_START" input required.
0 = OS QSEL_ERR message deactivated
1 = OS QSEL_ERR message is active
0 = OS QRUN_ERR message deactivated
1 = OS QRUN_ERR message is active
Name
0 = "Auto" operation disabled
1 = "Auto" key, external enable for operation
0 = "Manual" operation disabled
1 = "Manual" key, external enable for operation
not used
0 = "Storage location selection" operation disabled
1 = "Storage location selection", external enable for operation
0 = "Search" operation disabled
1 = "Search" key, external enable for operation
Type Default
DWORD 16#0
DWORD 16#90010100
DWORD 16#0
WORD 16#FFFF
WORD 0
WORD 0
DWORD 0
Meaning
Meaning
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
OS
tag
-
-
-
-
-
-
-