Siemens SIMATIC PCS 7 Function Manual page 180

Order management
7.1 FB_JOB
Message box
A message box with user-defined texts can be displayed in the faceplate. These texts can be
created beforehand in multilingual format in the text library. The message box display is
controlled using the "MSBO_ACT" (display) and "MSBO_NO" (text number) block inputs.
MSBO_ACT
MSBO_NO
You can use bit 9 of the "HIDE_BUT" block input to configure whether or not a confirmation
button is to be displayed in the message box. The "Confirmation" button sets the "QMSBOACK"
block output. When the time set at the "IMP_T" input has expired, the "QMSBOACK" output
is reset.
Signal specification
In "External" mode, you use the "EXT_IT" input to specify which signals are to be evaluated
for job management:
● EXT_IT = 0: Signals from inputs that are interconnected in the AS
● EXT_IT = 1: Signals from inputs that are interconnected with an IT system
In "Automatic" mode, you use the "L_IT" input to specify which signals are to be evaluated for
job management:
● L_IT = 0: Signals from inputs that are interconnected in the AS
● L_IT = 1: Signals from inputs that are interconnected with an IT system
180
Input
"0" = Message box hidden
"1" = Message box shown
Select message text =
WinCC text library ID
Meaning
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA