Siemens SIMATIC PCS 7 Function Manual page 179

"Up"
"Down"
"Activate job"
"Apply"
Manual name specifi‐
cation
Manual ID specifica‐
tion
Showing/hiding buttons in the faceplate
You can use the enable bits of the "FB_JOB" block input word "HIDE_BUT" to specify whether
buttons/functions in the "FB_JOB" faceplate are visible (1 = Visible, 0 = Hidden).
The operator control enable signals are available at the corresponding block outputs (1 =
Visible, 0 = Hidden).
"Manual / Auto"
"Internal"/ "External"
"One time / "Cyclic"
"New"
"Delete"
"Up"/"Down"
"End"
"Abort"
"Activate job"
"Confirmation"
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Function OP_EN
Bit 11
Bit 12
Bit 13
Button
Output
EN_POSUP ● "Internal" mode
● Job selected
● New position available
EN_POSDO
● "Internal" mode
● Job selected in list
● New position available
EN_TAOV "Internal" mode
EN_ACJO
● "Internal" mode
● Job list not empty
● Job interface empty
EN_TITL "MODE" bit 1 = 1
EN_ID "MODE" bit 2 = 1
HIDE_BUT
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Order management
7.1 FB_JOB
Additional conditions
Output
DIS_MAAU
DIS_EXIN
DIS_MODE
DIS_EDIT
DIS_DEL
DIS_UPDO
DIS_END
DIS_ABOR
DIS_ACJO
DIS_ACK
179