Error Handling - Siemens SIMATIC PCS 7 Function Manual

Parameter
AUX_PR10 ALARM_8P: external associated value SD_10
"x": WinCC tag available; "-": WinCC tag not available
7.1.5

Error handling

Errors occurring in the block are signaled via integrated "ALARM_8P" blocks and displayed at
the outputs of the block. The error bits are available at the block as an output signal.
The following error messages can be generated:
Output
QNOT_OK
QGR_ERR
QCSF
QMSG_ERR
QERROR
QERR_VER
QERROR
The following table shows the error bits of the "QERROR" status word:
QERROR
Bit 0 MONITORING
Bit 8 RUN_EN
Bit 16 REQ_QERR
Bit 17 REQ_MON_ERR
Bit 18 REQ_QPARAMF
Bit 19 REQ_QLEN_ERR
Bit 20 REQ_QARCHERR
Bit 21 REQ_TIMEMON
Bit 22 COPY_QERR
Bit 23 COPY_TIMEMON
Bit 24 SEL_ID
Bit 25 NEW_ID
Bit 26 NEW_PSN
Bit 27 NEW_TITLE
Bit 28 NEW_REQ_TL
Bit 29 NEW_REQ_ID
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
Description
Block error
Group error / fault
Control system error
Group error ALARM_8P blocks
Error bits
QERR_VER Version check error
Symbol
1 = Control command feedback error
1 = AS input "RUN_EN" = 0 while job is running
1 = "QERR" from "FB_XXXPA" feedback structure (normal mode) upon apply
job
1 = "MON_ERR" from "FB_XXXPA" feedback structure (normal mode) upon
apply job
1 = "QPARAMF" from "FB_XXXPA" feedback structure (normal mode) upon
apply job
1 = "QLEN_ERR" from "FB_XXXPA" feedback structure (normal mode) upon
apply job
1 = "QARCHERR" from "FB_XXXPA" feedback structure (normal mode) upon
apply job
1 = Monitoring timeout with apply job
1 = "QERR" from "FB_XXXPA" feedback structure (multiplexer mode) or
"COPY_TIMEMON" upon activate job
1 = Monitoring timeout with activate job
1 = ID not available in job list (EXTERNAL / IT job delete)
1 = Job ID <= 0 (create job)
1 = Parameter set number <= 0 (create job)
1 = Title was not specified (create job)
1 = Error requesting title (create job, internal)
1 = Error in job ID request (create job, internal)
Type
ANY
Meaning
Meaning
Order management
Default
-
Cause
"OK" flag of the block = 0
QCSF or QERROR >< 0
AS input control system error CFC = 1
ALARM_8P; .ERROR bit in instance DB
Refer to table below
Error in the version information
7.1 FB_JOB
WinCC tag
-
199