Siemens SIMATIC PCS 7 Function Manual page 175

MODE
Bit 8
Bit 9
Bit 10
Bit 11
Operating mode
You can define the following modes at the inputs of the "FB_JOB" block:
● Internal/external
You can use the "LIOPSELJ" and "EXT_L" inputs to specify whether the system switches
between "Internal" and "External" mode via the AS or the OS:
0
1
1
● Manual/Automatic
You can use the "LIOPSELC" and "AUT_L" inputs to specify whether the system switches
between "Manual" and "Automatic" mode via the AS or the OS:
0
1
1
● One time/Cyclic
You can use the "LIOPSELM" and "CYCLIC_L" inputs to specify whether the system
switches between "One time" and "Cyclic" mode via the AS or the OS:
0
1
1
Advanced Process Functions (APF)
Function Manual, 07/2016, A5E38719883-AA
1 = Automatic start if a job is available;
"Activate job" automatically starts the jobs in the job list
one after the other; even following an empty job list, the
next job in the job list is automatically started again.
1 = Automatic start with "Activate job"
Feedback monitoring of the control commands; 0 = No, 1
= yes
Status tracking; 0 = No, 1 = Yes
LIOPSELJ
-
0
1
LIOPSELC
-
0
1
LIOPSELM
-
0
1
Meaning
EXT_L
AUT_L
CYCLIC_L
Order management
7.1 FB_JOB
Symbol
CYCLE_AUTO_START
AUTO_JOB_START
MONITORING
FEEDBACK_TRACKING
Operating mode
Switch via OS
Internal
External
Operating mode
Switch via OS
MANUAL
AUTO
Operating mode
Switch via OS
One time
Cyclic
175