Server preparation and reinstallation
Removing the server from the rack
Prerequisites
The server must be shut down and all cables detached from the rear panel before removing
the server from the rack for service. Detach the Dialogic port board, LAN Ethernet, keyboard,
mouse and monitor cables as well as any other connections on the back of the server. Label
all cables so you can easily reconnect them.
1. Release the latches on both sides on the front of the server.
2. Extend the server until the server rail-release latches engage.
16
Maintaining the Avaya S8730 Server for Modular Messaging
Caution:
You must physically unplug all AC power cords to completely remove power to
the S8730 server. Do not open the server without first unplugging AC power.
June 2009