Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Page Title
Login Window Title
User Name Title
Password Title
Logout Window Title
Notification
Click the Set to Default button to replace the information with the default information.
Click the Apply button to accept the changes made.
Network Access Authentication
Guest VLAN
This window is used to display and configure the network access authentication guest VLAN settings.
To view the following window, click Security > Network Access Authentication > Guest VLAN, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
VID
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Network Access Authentication Global Settings
This window is used to display and configure the global Network Access Authentication settings.
Description
Enter a custom page title message here. This message can be up to 128
characters.
Enter a custom login window title here. This title can be up to 64 characters.
Enter a custom username title here. This title can be up to 32 characters.
Enter a custom password title here. This title can be up to 32 characters.
Enter a custom logout window title here. This title can be up to 64 characters.
Enter additional information to display in the notification area here. This
information can be up to 128 characters for each line. There are 5 lines
available for additional information.
Figure 9-696 Guest VLAN Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the VLAN ID used here. This value must be between 1 and 4094.
355
Advertisement
Table of Contents
