Setting the group identifier
About this task
Use this procedure to set or change the group identifier only if the LAN Administrator instructs you to
do so.
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Group.
5. Enter any Group value between 0 to 999.
When you change the Group value, the phone restarts after you exit the admin menu.
6. Press Save.
Setting event logging
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Log.
5. Use the Right and Left Arrow keys to select one of the following settings associated with
the corresponding SYSLOG_LEVEL:
• Emergencies: SYSLOG_LEVEL=0
• Alerts: SYSLOG_LEVEL=1
• Critical: SYSLOG_LEVEL=2
• Errors: SYSLOG_LEVEL=3
• Warnings: SYSLOG_LEVEL=4
• Notices: SYSLOG_LEVEL=5
• Information: SYSLOG_LEVEL=6
• Debug: SYSLOG_LEVEL=7
6. Press Save.
September 2017
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Setting the group identifier
63