Avaya J129 Installing And Administering page 102

List of configuration parameters
Parameter name
EXCHANGE_AUTH_USERNAME
_FORMAT
EXTEND_RINGTONE
F
FAILED_SESSION_REMOVAL_TI
MER
FQDN_IP_MAP
G
G726_PAYLOAD_TYPE
September 2017
Default value Description
This parameter is used only for development and
debugging purposes.
0 Specifies the necessary format of the username for
http authentication.
Value operation:
• 0: Current format. Username=
• 1: Office 365 format. Username=
Null Provides a way to customize ring tone files.
This is a comma separated list of file names in xml
format.
30 Specifies the number of seconds the phone
displays a session line appearance and generates
re-order tone after an invalid extension is dialed
and user does not press the End Call softkey.
Valid values are 5 through 999.
Null Specifies a comma separated list of name or value
pairs where the name is an FQDN and the value is
an IP address. The IP address may be IPv6 or
IPv4 but the value can only contain one IP
address. String length is up to 255 characters
without any intervening spaces inside the string.
The purpose of this parameter is to support cases
where the server certificate Subject Common
Name of Subject Alternative Names includes
FQDN, instead of IP address, and the
SIP_CONTROLLER_LIST is defined using IP
address. This parameter is supported with phone
service running over TLS, however, the main use
case is for Avaya Aura SM/PPM services. This
parameter must not to be used as an alternative to
a DNS lookup or reverse DNS lookup.
110 Specifies the RTP payload type to be used for the
G.726 codec.
Valid values are 96 through 127.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
<ExchangeUserDomain\ExchangeUserAccount>
or Username= <ExchangeUserAccount> if
<ExchangeUserDomain> is empty.
<ExchangeUserAccount@ExchangeUserDomain
> or Username= <ExchangeUserAccount> if
<ExchangeUserDomain> is empty.
Table continues...
102