Avaya J129 Installing And Administering page 107

Parameter name
LLDP_ENABLED
LOCAL_CALL_PREFIX
LOCAL_DIAL_AREA_CODE
LOCALLY_ENFORCE_PRIVACY_
HEADER
LOG_CATEGORY
September 2017
Default value Description
Valid values can contain 0 to 1096 ASCII
characters, including commas. Filenames must
end in .xml
2 Specifies whether LLDP is enabled.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Enabled, but only begins transmitting if an
DIAL_AS_IS Sets the prefix for local calls.
Permissible values are the Area Code denoted by
AC, a string of digits, or the default, DIAL_AS_IS.
Specifies if user must dial area code for calls within
same area code regions.
Value Operations:
• 0: User does not need to dial area code.
• 1: User need to dial area code. When enabled,
0 Specifies whether the phone displays Restricted
instead of CallerId information when a Privacy
header is received in a SIP INVITE message for an
incoming call.
Value Operation:
• 0: Disabled. CallerID information is displayed.
• 1: Enabled. Restricted is displayed.
Null Specifies a list of categories of events to be logged
through syslog and locally.
This parameter must be specified to log events
below the Error level.
The list can contain up to 255 characters.
Category names are separated by commas without
any intervening spaces.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
LLDP frame is received.
the area code parameter (PHNLAC) should also
be configured.
Note:
This parameter is supported when the phone
is failed over.
Table continues...
107