Appendix A: List Of Configuration Parameters - Avaya J129 Installing And Administering

Appendix A: List of configuration
Parameter name
A
100REL_SUPPORT
ADMIN_LOGIN_ATTEMPT_ALLO
WED
ADMIN_LOGIN_LOCKED_TIME
ADMIN_PASSWORD
September 2017
parameters
Default value
1
10
10
27238
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Description
Specifies whether the 100rel option tag is included
in the SIP INVITE header field.
Value Operation:
• 0: The tag is not included.
• 1: The tag is included.
Specifies the allowed number of failed attempts to
enter the access code before the local or craft
procedures gets locked. Valid values are from 1 to
20.
Specifies the duration for lockout when a user
reaches the maximum attempts limit for accessing
the Administration menu.
Valid values are from 5 min. to 1440 min.
Specifies an access code for accessing the Admin
menu.
Valid values are from 6 to 31 alphanumeric
characters including upper case, lower case
characters and special characters. However,
double quote character (") cannot be used for a
value of this parameter.
Note:
• If this parameter length is set below 6 or
above 31 alphanumeric characters, then the
parameter is treated as not defined.
• If this parameter is set in the
46xxsettings.txt file, then it replaces
PROCPSWD parameter.
Table continues...
87