Avaya J129 Installing And Administering page 91

Parameter name
CONFERENCE_TYPE
CONFIG_SERVER_SECURE_M
ODE
CONNECTION_REUSE
September 2017
Default value Description
pattern configured in System Manager for Adhoc
Conferencing.
Depending on the dial plan, the dial string can
need a prefix code, such as a 9 to get an outside
line. The domain portion of the URI can be in the
form of an IP address or an FQDN.
The value can contain 0 to 255 characters. The
default value is null.
1 Determines the selection of the Conference
Method.
Value Operation:
• 0: Local conferencing is supported based on
• 1: Server based conferencing is supported.
• 2: Click-to conference server based conferencing
If the parameter is set to a value that is outside the
range then default value is selected.
1 Specifies whether HTTP or HTTPS is used to
access the configuration server.
Value Operation:
• 0: HTTP
• 1: HTTPS
• 2: Use HTTPS if SIP transport mode is TLS,
This parameter is not supported in IP Office
environment as PPM is not supported.
1 Specifies whether the phone will use two UDP,
TCP, or TLS connection (for both outbound and
inbound) or one UDP, TCP, or TLS connection.
Value operation:
• 0: Disabled. The phone opens outbound
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
sipping services.
is supported.
Note:
The parameter is set to 0 in IP Office
environment.
otherwise use HTTP.
connection to the SIP Proxy and listening socket
for inbound connection from SIP proxy in parallel.
Table continues...
91