Avaya J129 Installing And Administering page 105

Parameter name
IPV6STAT
K
L
L2Q
L2QAUD
September 2017
Default value Description
Value operation:
• 0: DAD is disabled
• 1 to 5: Maximum number of transmitted Neighbor
0 Specifies whether IPv6 will be supported or not.
Value operation:
• 0: IPv6 will not be supported.
• 1: IPv6 will be supported.
0 Specifies whether the VLAN tagging is enabled or
disabled.
Value Operation:
• 0: Auto. VLAN tagging is turned on when the
• 1: On. VLAN tagging is turned on when the
• 2: Off. VLAN functionality is disabled.
6 Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for audio frames (RTP, RTCP, SRTP, SRTCP).
All other frames except those specified by the
L2QSIG parameter are set to priority 0.
Valid values are 0 through 7.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Solicitation messages.
network can support VLAN tagging and
L2QVLAN is non zero.
network can support VLAN tagging. The IP
phone sends tagged frames with VLAN =
L2QVLAN, even if L2QVLAN is set to 0.
Note:
This parameter can also be set through:
• Local admin procedure
• A name equal to value pair in DHCPACK
message
• SET command in a settings file
• DHCP option 43
• LLDP
Table continues...
105