Avaya J129 Installing And Administering page 89

Parameter name
AUTH
AUTHCTRLSTAT
B
BRANDING_VOLUME
BRURI
C
CALL_TRANSFER_MODE
September 2017
Default value Description
• 7: Six levels softer than normal
• 8: One level louder than normal
• 9: Two levels louder than normal
Specifies whether the script files are downloaded
from an authenticated server over an HTTPS link.
Value Operation:
• 0: Optional
• 1: Mandatory
0 Specifies if the enhanced debugging capabilities
can be activated from the SSH server by the Avaya
technicians only.
Value Operation:
• 0: Enhanced debugging capabilities are disabled.
• 1: Enhanced debugging capabilities are enabled.
The parameter must be set to 1 only for the
debugging period by Avaya technicians. Set the
parameter back to 0 when the debugging period
completes.
5 Specifies the volume level at which the Avaya
audio brand is played.
Value Operation
• 8: 9db above nominal
• 7: 6db above nominal
• 6: 3db above nominal
• 5: nominal
• 4: 3db below nominal
• 3: 6db below nominal
• 2: 9db below nominal
• 1:12db below nominal
Null Provides the capability to send a phone report to a
server with the URI of the server defined by this
parameter. To send the report, go to Main Menu >
Admin > Debug > Phone report.
0 Determines the call transfer mode in 3rd party
environments. Valid value is 0 or 1.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Table continues...
89