Avaya J129 Installing And Administering page 125

Parameter name
SLMSTAT
SNMPADD
SNMPSTRING
SNTPSRVR
SNTP_SYNC_INTERVAL
SPEAKERSTAT
September 2017
Default value Description
0 Specifies if the SLA Monitor agent is enabled or
not.
Value Operation:
• 0: Disabled
• 1: Enabled
Null Specifies a list of source IP addresses from which
SNMP query messages will be accepted and
processed.
Addresses can be in dotted-decimal format (IPv4),
colon-hex format (IPv6, if supported), or DNS
name format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters. The
default value is null.
Null Specifies a security string that must be included in
SNMP query messages for the query to be
processed.
Valid values contain 0 through 32 ASCII
alphanumeric characters.
The default value is null. Null disables SNMP.
Null Specifies a list of addresses of SNTP servers.
Addresses can be in dotted-decimal or DNS name
format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters.
1440 minutes Specifies the time interval, in minutes, during which
the phone will attempt to synchronize its time with
configured NTP servers. Valid values are from 60
to 2880 minutes.
2 Specifies the operation of the speakerphone.
Value Operation:
• 0: Speakerphone disabled
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
If default port is not used, both the SLA Mon
agent and server must be configured with the
same port. SLMSRVR impacts the phone's
SLA Mon agent configuration. A
corresponding configuration must also be
made on the SLA Mon server agentcom-
slamon.conf file
Table continues...
125