Avaya J129 Installing And Administering page 126

List of configuration parameters
Parameter name
SSH_ALLOWED
SSH_BANNER_FILE
SSH_IDLE_TIMEOUT
SUBSCRIBE_LIST_NON_AVAYA
SUBSCRIBE_SECURITY
September 2017
Default value Description
• 1: One-way speaker (also called monitor)
• 2: Full (two-way) speakerphone enabled.
2 Specifies if SSH is supported.
Value Operation:
• 0: Disabled
• 1: Enabled
• 2: Configured using local admin procedure.
Null Specifies the file name or URL for a custom SSH
banner file.
If the value is null, english banner is used for SSH.
The value can contain 0 to 255 characters.
10 Specifies the idle time in minutes after which an
SSH connection is terminated
Valid values are 0 through 32767.
A value of 0 means that the connection will not be
terminated.
Specifies comma separated list of event packages
to subscribe to after registration.
Possible values are: reg, dialog, mwi, ccs,
message-summary which is identical to mwi,
avaya-ccs-profile which is identical to ccs. The
values are case insensitive.
For IPO the recommended value shall be reg,
message-summary, avaya-ccs-profile.
Specifies the use of SIP or SIPS for subscriptions.
Value Operation:
• 0: The phone uses SIP for both the request URI
• 1: The phone uses SIPS for both the request URI
• 2: SES or PPM does not show a FS-phoneData
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
enabled.
When this mode is configured, then by default
the SSH server is disabled.
and the contactheader regardless of whether
SRTP is enabled.
and the contact header if SRTP is enabled. TLS
is on and MEDIAENCRYPTION has at least one
valid crypto suite.
FeatureName with a Feature Version of 2 in the
response to the getHomeCapabilities request.
Table continues...
126