Avaya J129 Installing And Administering page 101

Parameter name
ENCRYPT_SRTCP
ENFORCE_SIPS_URI
ENHDIALSTAT
EVENT_NOTIFY_AVAYA_MAX_U
SERS
September 2017
Default value Description
All emergency numbers will always be supported.
Value Operation:
• 0: Emergency softkey is not displayed.
• 1: Emergency softkey is displayed without a
• 2: Emergency softkey is displayed with a
0 Specifies whether RTCP packets are encrypted or
not. SRTCP is only used if SRTP is enabled using
MEDIAENCRYTIONRTCP. ENCRYPT_SRTCP
parameter controls RTCP encryption for RTCP
packets exchanged between peers. RTCP packets
sent to Voice Monitoring Tools are always sent
unencrypted.
Value Operation:
• 0: SRTCP is disabled.
• 1: SRTCP is enabled.
1 Specifies if a SIPS URI must be used for SRTP.
Value Operation:
• 0: Not enforced
• 1: Enforced
1 Specifies if the algorithm defined by the parameter
is used during certain dialing behaviors.
Value Operation:
• 0: Disables algorithm.
• 1: Enables algorithm, but not for contacts.
• 2: Enables algorithm including contacts.
20 Specifies the maximum number of users to be
included in an event notification message from CM/
AST-II or Avaya Aura
Valid values are 0 through 1000.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
confirmation screen.
confirmation screen.
Note:
The parameter is set to 0 for IP Office
environment.
Note:
The parameter is set to 0 for IP Office
environment.
®
Conferencing 6.0 or later.
Table continues...
101