Avaya J129 Installing And Administering page 118

List of configuration parameters
Parameter name
PROVIDE_OPTIONS_SCREEN
PROVIDE_TRANSFER_TYPE
PSTN_VM_NUM
Q
R
RDS_INITIAL_RETRY_ATTEMPT
S
RDS_INITIAL_RETRY_TIME
RDS_MAX_RETRY_TIME
RECORDINGTONE
RECORDINGTONE_INTERVAL
September 2017
Default value Description
Specifies if Options & Settings menu is displayed
on phone.
Value Operation:
• 0: No
• 1: Yes
0 Provides the call transfer type in 3rd party
environments.
Value 0 or 1.
Specifies the dialable string that is used to call into
the messaging system. For example, when you
press the Message Waiting button.
15 Specifies the number of retries after which the
phone abandons its attempt to contact the PPM
server.
Valid values are 1 through 30.
2 Specifies the number of seconds that the phone
waits for the first time before trying to contact the
PPM server again after a failed attempt. Each
subsequent retry is delayed by double the previous
delay.
Valid values are 2 through 60.
600 Specifies the maximum delay interval in seconds
after which the phone abandons its attempt to
contact the PPM server.
Valid values are 2 through 3600.
0 Specifies whether call recording tone is generated
on active calls.
Value Operation:
• 0: Call recording tone is not generated (default).
• 1: Call recording tone is not generated.
15 Specifies the number of seconds between call
recording tones.
Valid values are 1 through 60.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
This parameter is supported when the phone
is failed over.
Table continues...
118