Avaya J129 Installing And Administering page 68

Phone administration and configuration
The phone displays the following settings:
• Supplicant
• Pass-thru mode
5. Select the setting that you want to change.
6. Press the Change softkey or the Left and Right Arrow keys to cycle through the following
settings:
• For the Pass-thru mode:
- On: If DOT1X = 0
- On & proxy logoff: If DOT1X = 1
- Off: If DOT1X = 2
• For the Supplicant:
- Disabled: If DOT1XSTAT = 0
- Unicast: If DOT1XSTAT = 1
- Multicast: If DOT1XSTAT = 2
7. Press Save.
When you change the 802.1X data, the phone restarts after you exit the admin menu.
September 2017 Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
68