Avaya J129 Installing And Administering page 110

List of configuration parameters
Parameter name
MWISRVR
MYCERTCAID
MYCERTCN
MYCERTDN
MYCERTKEYLEN
September 2017
Default value Description
This parameter is set to 0 in IP Office environment.
Null Specifies a list of addresses of Message Waiting
Indicator servers.
Addresses can be in dotted-decimal or DNS name
format, separated by commas without any
intervening spaces.
The value can contain 0 to 255 characters.
CAIdentifier Specifies an identifier for the CA certificate with
which the SCEP certificate request is to be signed,
if the server hosts multiple Certificate Authorities.
The value can contain zero to 255 ASCII
characters.
The parameter is only available in an Avaya Aura
environment.
$SERIALNO Specifies the Common Name (CN) used in the
SUBJECT of an SCEP certificate request.
The value must be a string that contains either
$SERIALNO" (which will be replaced by the
phone's serial number) or $MACADDR (which will
be replaced by the phone's MAC address), but it
can contain other characters as well, including
spaces.
The value can contain eight ($MACADDR) to 255
characters.
Null Specifies the part the SUBJECT of an SCEP
certificate request that is common for all phones.
The value must begin with a / and can include
Organizational Unit, Organization, Location, State
and Country.
The value can contain Zero to 255 ASCII
characters.
2048 Specifies the bit length of the public and private
keys generated for the SCEP certificate request.
The value is a 4 ASCII numeric digits. The phone
supports only value 2048.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
Note:
/ must used as a separator between
components. Commas do not work with some
servers
®
Table continues...
110