Avaya J129 Installing And Administering page 104

List of configuration parameters
Parameter name
HTTPSRVR
I
ICMPDU
ICMPRED
INGRESS_DTMF_VOL_LEVEL
INTER_DIGIT_TIMEOUT
IPV6DADXMITS
September 2017
Default value Description
Valid value can contain zero or one IP address in
dotted decimal or DNS name format, optionally
followed by a colon and a TCP port number.
The value can contain 0 to 255 characters.
Null Specifies zero or more HTTP server IP addresses
to download configuration script files. The
addresses must be separated by commas without
any intervening spaces. The format of specifying IP
addresses are:
• Dotted decimal
• Colon-hex
• DNS name
The parameter can be set by using LLDP.
Valid values contains 0 to 255 ASCII characters.
Specifies if ICMP Destination Unreachable
messages are generated.
Value Operation:
• 0: No messages are generated.
• 1: Limited port unreachable messages are
• 2: Protocol and port unreachable messages are
Specifies if received ICMP Redirect messages are
processed.
Value Operation:
• 0: No
• 1: Yes
-12dBm Specifies the power level of tone, expressed in
dBm0.
Values can range from -20dBm to -7dBm.
5 Specifies the number of seconds that the phone
waits after a digit is dialed before sending a SIP
INVITE.
Valid values are 1 through 10.
1 Specifies whether Duplicate Address Detection is
performed on tentative addresses, as specified in
RFC 4862.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
generated.
generated.
Table continues...
104