Avaya J129 Installing And Administering page 99

Parameter name
ENABLE_MULTIPLE_CONTACT_
WARNING
ENABLE_OPUS
ENABLE_PHONE_LOCK
ENABLE_PPM_SOURCED_SIPP
ROXYSRVR
The parameter is only available in
®
an Avaya Aura environment.
September 2017
Default value Description
• 1: Yes
Specifies if a warning message must be displayed
if there are multiple phones registered on a user's
behalf.
Value Operation:
• 0: No
• 1: Yes
1 Specifies if the OPUS codec capability of the
phone is enabled or disabled.
Value Operation:
• 0: Disabled.
• 1: Enabled OPUS wideband with bitrate of
• 2: Enabled OPUS narrowband with bitrate of
• 3: Eanbled OPUS narrowband with bitrate of
0 Specifies whether the Lock softkey and lock
feature button are enabled on the phone. If you
enable the parameter, then a user can lock the
phone by pressing the button or selecting the
feature.
Value Operation:
• 0: Disabled. Lock softkey and feature button are
• 1: Enabled. Lock softkey and feature button are
1 Enables PPM as a source of SIP proxy server
information.
Value Operation:
• 0: Proxy server information received from PPM is
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
Multiple registered phones can lead to service
disruption.
20KBps.
16KBps.
12KBps.
Note:
Avaya J129 IP Phone does not support third-
party local call conference with OPUS.
not displayed.
displayed.
not used.
Table continues...
99