Configuring Audiocodes Server For Survivability - Avaya J129 Installing And Administering

System failover
Parameter name
REGISTERWAIT
SIP_CONTROLLER_LIST
SIMULTANEOUS_REGISTRATIO
NS
SIPREGPROXYPOLICY

Configuring AudioCodes server for survivability

If you set AudioCodes server in the Avaya environment for survivability, you must configure the
following options:
• Connection reuse
• Connection reuse in survivability mode
• Record-Route
September 2017
Default value Description
Specifies the number of seconds between re-
registrations with the current server.
Null Specifies a list of SIP controller designators,
separated by commas without any spaces. Controller
designator has the following format: host[:port]
[;transport=xxx], where,
host is an proxy address in dotted-decimal or DNS
name format. In third-party call control setup, only
DNS format is supported.
[:port] is an optional port number.
[;transport=xxx] is an optional transport type where
xxx can be TLS, TCP, or UDP.
3 The number of Session Managers with which the
phone will simultaneously register.
Valid values are 1, 2 or 3.
Simultaneous Specifies whether the phone will attempt to maintain
one or multiple simultaneous registrations.
Value operation:
• Alternate: The phone attempts and maintains only
a single registration.
• Simultaneous: The phone attempts and maintains
simultaneous registrations will be attempted and
maintained with all available controllers.
In IP Office environment and third-party call control
setup, set the parameter to Simultaneous.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
78