Tlv Impact On System Parameter Values - Avaya J129 Installing And Administering

File Server configuration
Category
TIA LLDP MED
TIA LLDP MED
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Basic Mandatory

TLV impact on system parameter values

System parameter
name
PHY2VLAN
L2QVLAN and L2Q
L2Q, L2QVLAN,
L2QAUD,
DSCPAUD
September 2017
TLV Name (Type) TLV Info String (Value)
Inventory – Avaya.
Manufacturer Name
Inventory – Model MODEL with the final Dxxx characters removed.
Name
Call Server IP Call Server IP Address. Subtype = 3.
address
IP Phone Phone IP address, Phone Address Mask, Gateway IP Address.
addresses Subtype = 4.
File Server File Server IP Address. Subtype = 6.
802.1Q Framing 802.1Q Framing = 1 if tagging or 2 if not.
End-of-LLDPDU Not applicable.
TLV name Impact
IEEE 802.1 Port The value of the PHY2VLAN parameter on the phone is
VLAN ID configured from the value of the Port VLAN identifier in the TLV.
IEEE 802.1 VLAN The value is changed to the TLV VLAN Identifier. L2Q is set to 1
Name (ON).
A check is made as to whether a reset is necessary to obtain a
new IP address due to a change in the values of the parameters
L2Q or L2QVLAN.
VLAN Name TLV is ignored if:
• The value of USE_DHCP is 0 and the value of IPADD is not
0.0.0.0.
• The current value of L2QVLAN was set by a TIA LLDP MED
Network Policy TLV.
• The VLAN name in the TLV does not contain the substring
"voice" in lower-case, upper-case or mixed-case ASCII
characters anywhere in the VLAN name.
TIA LLDP MED L2Q - set to 2 (off) if T (the Tagged Flag) is set to 0 and to 1 (on)
Network Policy if T is set to 1.
(Voice) TLV
L2QVLAN - Set to the VLAN ID in the TLV.
L2QAUD - Set to the Layer 2 Priority value in the TLV.
DSCPAUD - Set to the DSCP value in the TLV.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Table continues...
42