Avaya J129 Installing And Administering page 88

List of configuration parameters
Parameter name
AGCHAND
AGCSPKR
ASTCONFIRMATION
AUDIOSTHS
September 2017
Default value Description
1 Specifies the status of Automatic Gain Control
(AGC) for the handset.
Value Operation:
• 0: Disables AGC for the handset.
• 1: Enables AGC for the handset.
1 Specifies the status of Automatic Gain Control
(AGC) for the speaker.
Value Operation:
• 0: Disables AGC for the speaker.
• 1: Enables AGC for the speaker.
60 Specifies the number of seconds that the phone
waits to validate an active subscription when it
subscribes to the avaya-cm-feature-status
package.
Valid values are 16 through 3600.
This parameter is not supported in IP Office
environment as there is no subscription to Avaya-
cm-feature-status.
0 Specifies the level of sidetone in the handset.
Value Operation:
• 0: Normal level for most users
• 1: Three levels softer than normal
• 2: Inaudible
• 3: One level softer than normal
• 4: Two levels softer than normal
• 5: Four levels softer than normal
• 6: Five levels softer than normal
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
• If you set ADMIN_PASSWORD in the Avaya
®
Aura System Manager you require at least
®
Avaya Aura System Manager 7.1.0.
• Setting this parameter through PPM is more
secure because this file can usually be
accessed and read by anyone on the
network. Setting the value in this file is
intended primarily for configurations with
versions of phone or if server software that
do not support setting this value from the
server.
Table continues...
88