Avaya J129 Installing And Administering page 123

Parameter name
SIPCONFERENCECONTINUE
SIPDOMAIN
SIPPORT
SIPSIGNAL
SLMCAP
SLMCTRL
September 2017
Default value Description
list has the following format: host[:port]
[;transport=xxx].
0 Specifies if a conference call continues after the
host hangs up.
Value Operation:
• 0: Drop all parties.
• 1: Continue conference
This parameter is set to 1 in IP Office environment.
Null Specifies the domain name to be used during SIP
registration.
The value can contain 0 to 255 characters. The
default value is null.
5060 Specifies the port the phone opens to receive SIP
signaling messages.
Valid values are 1024 through 65535. The default
value is 5060.
2 Specifies the type of transport used for SIP
signaling.
Value Operation:
• 0: UDP
• 1: TCP
• 2: TLS
0 Specifies if the SLA Monitor agent is enabled for
packet capture.
Value Operation:
• 0: Disabled (default)
• 1: Enabled and payloads are removed from RTP
• 2: Enabled and payloads are included in RTP
• 3: Controlled from admin menu - Allows you to
0 Specifies whether the SLA Monitor agent is
enabled for phone control.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
packets
packets
enable or disable of RTP packets capture using
local admin procedures.
Table continues...
123