Avaya J129 Installing And Administering page 103

Parameter name
GMTOFFSET
GROUP
H
HANDSET_PROFILE_DEFAULT
HANDSET_PROFILE_NAMES
HTTPEXCEPTIONDOMAINS
HTTPPORT
HTTPPROXY
September 2017
Default value Description
0:00 Specifies the time offset from GMT in hours and
minutes.
The format begins with an optional + or - (+ is
assumed if omitted), followed by 0 through 12
(hours), followed by a colon (:), followed by 00
through 59 (minutes).
0 Specifies specifically-designated groups of phones
by using IF statements based on the GROUP
parameter.
The value of GROUP can be set manually in a
phone by using the GROUP local admin
procedure.
The default value of GROUP in each phone is 0,
and the maximum value is 999.
1 Specifies the number of the default handset audio
profile.
Valid values are 1 through 20.
Null Specifies an ordered list of names to be displayed
for handset audio profile selection. The list can
contain 0 to 255 UTF-8 characters.
Names are separated by commas without any
intervening spaces. Two commas in succession
indicate a null name, which means that the default
name should be displayed for the corresponding
profile. Names might contain spaces, but if any do,
the entire list must be quoted. There is no way to
prevent a profile from being displayed.
Null Specifies a list of one or more domains, separated
by commas without any intervening spaces, for
which HTTPPROXY is not used.
The value can contain 0 to 255 characters. The
default value is null.
80 Sets the TCP port used for HTTP file downloads
from non-Avaya servers.
Values range from 0 to 65535.
Null Specifies the address of the HTTP proxy server
used by SIP phones to access an SCEP server
that is not on the enterprise network.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Table continues...
103