Avaya J129 Installing And Administering page 117

Parameter name
PROCPSWD
PROCSTAT
PROVIDE_LOGOUT
PROVIDE_NETWORKINFO_SCR
EEN
September 2017
Default value Description
Value Operation:
• 0: Power conservation mode is not supported.
• 1: Power conservation mode is supported.
27238 Specifies an access code to access the admin
menu procedures.
Valid values contain 0 through 7 ASCII numeric
digits. The default value is 27238 unless indicated
otherwise below. A null value implies that an
access code is not required for access.
0 Specifies an access code to access the admin
menu procedures.
Value Operation:
• 0: Local procedures can be used (default).
• 1: Local procedures cannot be used.
Specifies if user can log out from the phone.
Value Operation:
• 0: No
• 1: Yes
Specifies if the Network Information menu is
displayed on the phone.
Value Operation:
• 0: No
• 1: Yes
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
• Setting this parameter through PPM is more
secure because this file can usually be
accessed and read by anyone on the
network. Setting the value in this file is
intended primarily for configurations with
versions of phone or if server software that
do not support setting this value from the
server.
• For enhanced security, use
ADMIN_PASSWORD instead of
PROCPSWD.
Note:
This parameter is set to 0 in IP Office
environment.
Table continues...
117