Dhcp Lease Time - Avaya J129 Installing And Administering

File Server configuration
Parameter Description
HTTPPORT Destination port for HTTP requests. The default is 80.
HTTPSRVR The firmware files are digitally signed, so TLS is not required for security.
ICMPDU Controls the extent to which ICMP Destination Unreachable messages are sent in response
to messages sent to closed ports so as not to reveal information to potential hackers. The
default is 1, that is sends Destination Unreachable messages for closed ports used by
traceroute.
ICMPRED Controls whether ICMP Redirect messages are processed. The default is 0, that is, redirect
messages are not processed.
L2Q 802.1Q tagging mode. The default is 0 for automatic.
L2QVLAN VLAN ID of the voice VLAN. The default is 0.
PHY1STAT Controls the Ethernet line interface speed. The default is 1 for auto-negotiate.
PHY2STAT Controls the secondary Ethernet interface speed. The default is 1 for auto-negotiate.
PROCPSWD Security string used to access Admin menu.
The default is 27238. ADMIN_PASSWORD replaces this parameter if ADMIN_PASSWORD
is set in the 46xxsettings.txt file.
REUSETIME Time in seconds for IP address reuse timeout, in seconds. The default is 60 seconds.
SIP_CONTR SIP proxy or registrar server IP or DNS addresses that can be 0 to 255 characters, IP
OLLER_LIST address in the dotted decimal name format, separated by commas and without any
intervening spaces. The default is null, that is, no controllers.
TLSDIR Used as path name that is prepended to all file names used in HTTPS GET operations
during initialization. The string length can be from 0 to 127.
TLSPORT Destination TCP port used for requests to https server in the range of 0 to 65535. The
default is 443, the standard HTTPS port.
TLSSRVR IP addresses or DNS names of Avaya file servers used to download configuration files.
Firmware files can also be downloaded using HTTPS.
VLANTEST Number of seconds to wait for a DHCPOFFER on a non-zero VLAN. The default is 60
seconds.
Note:
In an IP Office environment J100settings.txt and J100Supgrade.txt files are auto-
generated. There is a provision where you can set up a different file server with your own
custom Settings file.

DHCP lease time

The DHCP standard states that when a DHCP lease expires, the device should immediately cease
using its assigned IP address. However, if the network has problems and the only DHCP server is
centralized or if the DHCP server itself has problems, the device will not receive responses to its
September 2017
Note:
Transport Layer Security is used to authenticate the server.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
32