Changing The Group Identifier - Avaya J169 Installing And Administering

Changing the group identifier

About this task
When updating the local Craft procedure or Admin menu procedures press the appropriate softkey
on IP phone.
Note:
Perform this procedure only if the LAN Administrator instructs you to do so.
Procedure
1. Select GROUP from the Craft Procedures screen.
The following text is displayed:
• Current Setting
• New Setting
where Current Setting is the current system value of NVGROUP.
2. In the Group text box, enter a valid Group value from 0 to 999.
3. Press Save to store the new setting. The deskphone displays the Craft Procedures screen.
The deskphone displays the Craft Procedures screen.
May 2018 Installing and Administering Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
Changing the group identifier
181