Avaya J129 Installing And Administering page 100

List of configuration parameters
Parameter name
ENABLE_PRESENCE
ENABLE_REDIAL
ENABLE_REMOVE_PSTN_ACCE
SS_PREFIX
ENABLE_SHOW_EMERG_SK
ENABLE_SHOW_EMERG_SK_U
NREG
September 2017
Default value Description
• 1: Proxy server information received from PPM is
1 Specifies if presence will be supported.
Value Operation:
• 0: Disabled
• 1: Enabled
Specifies if Redial softkey is available.
Value Operation:
• 0: No
• 1: Yes
Allows phone to perform digit manipulation during
failure scenarios. This parameter allows removal of
PSTN access prefix from the outgoing number.
Value Operation;
• 0: PSTN access prefix is retained in the outgoing
• 1: PSTN access prefix is removed from the
2 Specifies whether an Emergency softkey, with or
without a confirmation screen, is displayed when
the phone is registered. All emergency numbers
are always supported.
Value Operation:
• 0: Emergency softkey is not displayed.
• 1: Emergency softkey is displayed without a
• 2: Emergency softkey is displayed with a
2 Specifies whether an Emergency softkey, with or
without a confirmation screen, is displayed when
the phone is not registered.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
not used.
Note:
This parameter is set to 0 in IP Office
environment.
number.
outgoing number.
confirmation screen.
confirmation screen.
Note:
The parameter is set to 0 for IP Office
environment.
Table continues...
100