Avaya J129 Installing And Administering page 113

Parameter name
OUTBOUND_SUBSCRIPTION_R
EQUEST_DURATION
OPUS_PAYLOAD_TYPE
P
PHNCC
PHNDPLENGTH
PHNEMERGNUM
PHNMOREEMERGNUMS
PHNIC
PHNLAC
September 2017
Default value Description
• 2: Use the OCSP field of the Authority
86400 Specifies the duration in seconds requested by the
phone in SUBSCRIBE messages, which can be
decreased depending on the response from the
server.
Valid values are 60 through 31536000 (one year).
The default value is 86400 (one day).
116 Dynamically specifies the RTP payload type to be
used for OPUS codec. The parameter is used
when the media request is sent to the far-end in an
INVITE or 200 OK when INVITE with no Session
Description Protocol (SDP) is received. The range
is between 96 to 127.
1 Specifies the country code for United States. The
value is 1.
Valid values 1 through 999.
5 Specifies the internal extension number length.
If your extension is 12345, and your dial plan
length is 5.
The maximum extension length is 13. This value
must match the extension length set on your call
server.
Valid values are 3 through 13.
Null Specifies an emergency phone number to be
dialed if the associated button is selected.
Valid values can contain up to 30 dialable
characters (0 to 9, *, #).
Null Specifies list of emergency numbers separated by
comma. Valid values may contain up to 30 dialable
characters (0 to 9, *, #).
011 Specifies the international access code
For the United States, the value is 011.
Valid values are from 0 to 4 dialable characters
(0-9,*,#).
Phone's Local Area Code indicates the phone's
local area code, which along with the parameter
LOCAL_DIAL_AREA_CODE, allows users to dial
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Information Access (AIA) extension of the
certificate and then the OCSP_URI.
Table continues...
113