Avaya J129 Installing And Administering page 109

Hide thumbs Also See for J129:
Table of Contents

Advertisement

Parameter name
MEDIA_NEG_PREFERENCE
MUTE_ON_REMOTE_OFF_HOO
K
September 2017
Default value
Description
• 5: aescm128-hmac80-unenc
• 6: aescm128-hmac32-unenc
• 7: aescm128-hmac80-unenc-unauth
• 8: aescm128-hmac32-unenc-unauth
• 9: none (default)
• 10: aescm256-hmac80
• 11: aescm256-hmac32
The list of media encryption options is ordered from
high (left) to the low (right) options. The phone
publishs this list in the SDP-OFFER or chooses
from SDP-OFFER list according to the list order
defined in MEDIAENCRYPTION.
Avaya Aura
capability to change the list order in the SDP-
OFFER (for audio only) when the SDP-OFFER is
pass through.
0
Specifies the address family preference used by a
dual mode answer in non-Avaya environment. This
parameter is not applicable for single mode
phones.
Value operation:
• 0: Remote or offerer's preference
• 1: Local
0
Controls the speakerphone muting for a remote-
initiated (a shared control or OOD-REFER)
speakerphone off-hook.
Value Operation:
• 0: The speakerphone is unmuted.
• 1: The speakerphone is muted.
The value is applied to the phone only when the
phone is deployed with a Avaya Aura
Communication Manager 6.2.2 and earlier
releases. If the phone is deployed with Avaya
Aura
setting is ignored. Instead the feature is delivered
through PPM. The Turn on mute for remote off-
hook attempt parameter is enabled in the station
form through the Avaya Aura
Avaya Aura
administrative interfaces.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
®
Communication Manager has the
®
Communication Manager 6.3 or later, the
®
®
Communication Manager (SAT)
®
Session Manageror
Table continues...
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents