Boiler Block Assembly - Buderus Logano GE515 Installation And Maintenance Instructions Manual

8

Boiler block assembly

8 Boiler block assembly
Depending on the type of delivery, we distinguish
between delivery in loose sections and as ready
assembled block. For a delivery as block, the boiler
sections are pre-assembled and checked for leaks prior
to despatch. If, because of physical limitations, a boiler
block cannot be assembled as a complete unit, the on
site installation is carried out using loose components.
For the further installation of pre-assembled boiler
sections, chapter 8.3 "Positioning the boiler block –
for pre-assembled deliveries", page 26.
DANGER OF INJURY
through inadequately secured boiler
sections.
CAUTION!
Use only suitable means of
transportation when handling individual
boiler sections, e.g. a sack truck with
strap or a stair truck, etc.
When handling, secure the boiler
sections to the means of transport to
prevent them slipping.
18 Logano GE515 - We reserve the right to make any changes due to technical modifications.
5
4
3
2
1
Fig. 8 Boiler block
1
Plinth or vibration absorbing boiler plinth
2
Flue gas collector
3
Rear section
4
Return connection
5
Flow connection
6
Centre section
7
Anchor rod
8
Arrow – assembly direction
9
Front section
10 Burner door with burner plate
6
7
8
9
10
7