Buderus Logano GE515 Installation And Maintenance Instructions Manual page 43

Hook the burner cable with strain relief into the cable
gland (Fig. 57, [1]).
Insert the burner cable with strain relief into the
burner door casing.
Route the burner cable inside the burner door casing
return upwards and secure with a fixing bracket, so
that the burner cable avoids touching any hot boiler
parts.
Push the burner door casing from the front onto the
burner door, and secure with four bolts on the door
(Fig. 57, [2] to [5]).
Route the burner cable to the control device cable
gland.
Hook in the burner door facia panels into the burner
door casing (Fig. 58, [1] and [2]).
Place the type plate clearly visible and according to
boiler location on the r.h. or the l.h. side panel.
USER NOTE
For boilers delivered as pre-assembled
blocks you will find the type plate together
with the installation and maintenance
instructions inside the combustion
chamber; if you receive loose components
you will find it inside a clear bag on the
burner door.
Logano GE515 - We reserve the right to make any changes due to technical modifications.
Boiler block assembly
4
3
2
Fig. 57 Install the burner door casing
2
1
Fig. 58 Hook in the burner door facia panels
8
5
1
43